CFD Simulation Should Be a Data Center Best Practice

Over the years that I have been involved in the data center industry, I have read numerous articles on power and cooling best practices to solve critical problems from a compliance, efficiency and capacity standpoint.  

In his recent blog “6 Data Center Design Best Practices,” Mark Gaydos touches on the six best practices for data center operators, one of which focuses on having a power and cooling strategy in place to maintain a highly efficient data center. The engineer in me appreciates the fact that best practices are available to ensure that problems are solved using tried-and-true methods. However, when it comes to optimizing power and cooling systems in a data center, I don’t quite agree that current best practices can solve the critical problems faced by today’s owner-operators.  

Specifically, Gaydos suggests that organizations should use containment to manage airflow and cooling. The concept of controlling airflow using containment is nothing new, and experience has repeatedly demonstrated that blanket solutions don’t work. I have seen successful, as well as unsuccessful, installations of hot and cold aisle containments. 

It's a difficult balance to strike. Under-pressurize the aisle and the servers will pull in air from leakages in and around the cabinets. Over-pressurize the aisle and you will be wasting air and reducing the cooling efficiency.  

Figure 1. Recirculation inside a server can be difficult to manage

To balance the required airflow to the supplied airflow effectively, you must ensure you are matching the air supply to demand for each IT equipment installed. Add cooling controls to the mix and now you have a complex system that not only needs to match the demand from existing load but can also match that of future loads.

Mark also alluded to having enough power and cooling to keep up with future changes. This is correct at the macro level since you need to ensure you match facility demands to meet business demands. However, at the micro level, this is a lot more difficult when it comes to cooling. 

In my blog “Does your business have the capacity to change?” I demonstrate that, for the same total cooling, two layouts can yield different results. 

Figure 2. Two layouts can produce different results despite the same total cooling

In my example, one layout works and the other doesn’t, demonstrating the complexity of managing cooling at a micro level. Both examples indicate that merely adopting "best practices" doesn’t guarantee improvement in data center performance without CFD simulation. As such, CFD simulation must also be recognized as a best practice for designing and operating data centers. 

With a data center digital twin, you can predict all possible changes to your data center and pick the ones that meet your objectives as well as your budget. I am not advocating dropping best practices, but isn’t it time that the data center industry adopts CFD simulation as a best practice?

Blog written by: Akhil Docca, Director of Marketing


【関西】クラウド業務改革EXPO 出展のお知らせ

 ◆会  期 :  2020年1月29日~31日 10:00~18:00 (最終日のみ17時まで)◆ブース位置 : インテックス大阪 5号館 (小間番号:1-21)◆出展製品 :  6SigmaRo…


【アンケートブログ 第3回】キャパシティ管理

(投稿者:技術部 磯辺)■ はじめに全3回でお届けしているアンケートブログも、今回で最終回です。以前のブログではCFD技術を活用した「熱的リスクの検証」や「コスト削減」について紹介しております。ぜひ…


13 June, 2019